CITGO PETROLEUM CORP -- EXTRA RANGE TWO-CYCLE ENGINE OIL, 21-607  -- 9150-00N035332
<pre>=====================  Product Identification  =====================

Product ID:EXTRA RANGE TWO-CYCLE ENGINE OIL, 21-607
MSDS Date:01/18/1990
FSC:9150
NIIN:00N035332
MSDS Number: BQCKB
=== Responsible Party ===
Company Name:CITGO PETROLEUM CORP
Box:3758
City:TULSA
State:OK
ZIP:74102
Country:US
Info Phone Num:918-495-5933
Emergency Phone Num:318-491-6215;800-424-9300(CHEMTREC)
CAGE:7X110
=== Contractor Identification ===
Company Name:CITGO PETROLEUM CORP
Address:6100 S YALE AVE
Box:3758
City:TULSA
State:OK
ZIP:74102
Country:US
Phone:918-495-5933
CAGE:7X110

=============  Composition/Information on Ingredients  =============

Ingred Name:MINERAL OIL PETRO DISTILLATES,SOLV-REFINED(SEVERE)HEAVY
    NAPHTHENIC;(REFINED PETRO OIL)OR 64742-01-4.LD50(ORAL,RAT)>5G/KG
CAS:64741-96-4
RTECS #:PY8040001
Fraction by Wt: 60-80%

Ingred Name:MINERAL SPIRITS
CAS:64475-85-0
Fraction by Wt: <25%

Ingred Name:ASHLESS DISPERSANT AND ANTI-OXIDANT
Fraction by Wt: 5-15%

Ingred Name:RUST INHIBITOR
Fraction by Wt: <1%

Ingred Name:DYE
CAS:109125-50-0
Fraction by Wt: <1%

Ingred Name:SUPP DATA: PNEUMONIA. SUBCUTANEOUS OR INTRAMUSCULAR
    INJECTION REQUIRES PROMPT SURGICAL DEBRIDEMENT. IF NOT (ING 7)
RTECS #:9999999ZZ

Ingred Name:ING 6: FAMILIAR WITH TECHNIQUE, SEEK SKILLED ADVICE.
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHAL: LOW RISK OF INHAL. IN
    ENCLOSED SPACES/WHEN HOT, VAPS MAY REACH CONC SUFFICIENT TO CAUSE
    DROWS, DIZZ, HDCH, NAUS/LUNG IRRIT. MISTS ABOVE TLV MAY CAUSE CHEM
    PNEUMONITIS. SKIN/EYE: MILD IRRI T. INGEST:TOX IS RELATIVELY LOW,
    HOWEVER, OF A SAYBOLT VISCOSITY OF ABOUT 200C, THERE EXISTS STILL
    SOME(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:RISK OF ASPIR INTO LUNGS. ON INGEST OF
    LRG QTYS, SLIGHT GI DISCOMFORT, DIARR, & HDCH MAY OCCUR. SMALL
    DOSES MAY PRODUCE IRRIT & DIARR.
    INJECTION:SUBCUTANEOUS/INTRAMUSCULAR INJECTION SHOULD BE 
    CONSIDERED AS A MED EMERGECNY. CHRONIC:PRLNGD &/OR FREQUENT DERMAL
    CNTCT MAY CAUSE DRYING, CRACKING (DERM)(SUPP DATA)
Medical Cond Aggravated by Exposure:NONE.

=======================  First Aid Measures  =======================

First Aid:INHAL:REMOVE TO FRESH AIR. RESP SUPPORT, IF NEC. SEEK MEDICAL
    AID. SKIN: WASH W/SOAP & WATER. DO NOT WEAR HEAVILY CONTAM CLTHG
    BEFORE LAUNDERING. EYES: FLUSH W/LARGE VOLUMES OF WATER. SEEK
    PHYSICIAN I F ANY COMPLICATIONS ARISE. INGEST: DO NOT INDUCE
    VOMITING. SEEK MED AID. INJECTION:SUBCUTANEOUS INJECTION IS A MED
    EMERGECNY. SEEK MED AID IMMED. NOTE TO MD: FOLLOWING INGEST, AT A
    SAYBOLT (SUPP DATA)

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:165F,74C
Lower Limits:1.0%
Upper Limits:6.0%
Extinguishing Media:CO*2, DRY CHEMICAL, FOAM, WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:WATER MAY CAUSE FROTHING.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE SOURCES OF HEAT/IGNIT, PROVIDE ADEQ
    VENT, CONTAIN LEAK. SMALL SPILLS:ABSORB W/SUITABLE MATERIAL SUCH AS
    RAGS, STRAW OR SAND. LARGE SPILLS: CONTAIN SPILL IN EARTHEN DIKES
    FOR LATER RECOVERY. REP ORT SPILLS AS REQUIRED TO APPROPRIATE
    AUTHORITIES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE <150F. DO NOT APPLY HIGH HEAT OR
    FLAME TO CONTAINER. KEEP SEPARATE FROM STRONG OXIDIZNG AGENTS.
Other Precautions:CAUTION:EMPTY CNTNTS MAY CONTAIN PROD RESIDUE WHICH
    COULD INCL FLAMM/EXPLO VAPS. CONSULT APPRO FED, STATE & LOCAL
    AUTHORITIES BEFORE REUSING, RECONDITIONING, RECLAIMING, RECYLING OR
    DISPOSING OF EMPTY	CNTNRS &/OR WASTE RESIDUES OF PRODUCT.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NORMALLY NONE REQUIRED. IF HIGH VAPOR OR MIST
    CONCENTRATIONS EXPECTED, USE NIOSH/MSHA APPROVED RESPIRATOR
    APPROVED FOR ORGANIC VAPORS AND MISTS.
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:OIL IMPERVIOUS GLOVES. (POLYMER GLOVES)
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WEAR BODY-COVERING WORK CLOTHES TO AVOID
    PROLONGED OR REPEATED EXPOSURE.
Work Hygienic Practices:LAUNDER SOILED WORK CLOTHES BEFORE REUSE. WASH
    EXPOSED SKIN THOROUGHLY WITH SOAP AND WATER.
Supplemental Safety and Health
EFTS OF OVEREXP:OR FOLLICULITIS. RPTD EXCESSIVE EXPOSURE TO MISTS/FUMES
    MAY INDUCE PULMONARY IRRIT OR CHRONIC BRONCHITIS. FIRST AID PROC:
    VISCOSITY OF ABOUT 200C, THERE EXIST STILL SOME RISK OF ASPIR  INTO
    LNGS. REMOVAL BY CUFFED TUBE LAVAGE MAY BE CONSIDERED. ASPIR MATLS
    MAY CAUSE CHEM PNEUMONITIS/LIPOID (ING 6)

==================  Physical/Chemical Properties  ==================

HCC:V4
Boiling Pt:B.P. Text:>300F,>149C
Vapor Pres:<20
Vapor Density:>1
Spec Gravity:0.86 (H*2O=1)
Evaporation Rate &amp; Reference:<1 (BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLUE LIQUID, SLIGHT ODOR OF PETROLEUM DISTILLATE
Percent Volatiles by Volume:<25

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:CO*2, (CO UNDER INCOMPLETE
    COMBUSTION).

====================  Disposal Considerations  ====================

Waste Disposal Methods:IT IS THE RESPONSIBILITY OF THE USER TO
    DETERMINE IF THE MATL IS A HAZ WASTE @ TIME OF DISP. CHECK BEFORE
    DISP TO BE SURE YOU ARE IN COMPLIANCE W/ALL APPLIC FED, STATE, &
    LOC LAWS & REGS. CHEMTREC/RCR A EMERGENCY HOTLINE #:800-424-9346.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.